Description
This is a used Vitec Velocity Sensor. It has a very powerful magnet at one end and a BNC connector at the other end.
SPECIFICATIONS
Specifications |
Measurement Mode |
Bearing Type |
Anti-Friction |
Applications |
Fans, blowers, motors, any equipment running 720 to 60000 RPM and up to 160ºF |
DYNAMIC
Output |
460 mV Peak ±10% for 1.0 in/sec Peak at 100 Hz |
Frequency Response |
12 to 1000 Hz, ±10% |
Transverse Axis Sensitivity |
10% |
Natural Frequency |
10 Hz, ±10% |
Amplitude Range (Inches) |
0.075 (Maximum) In Vertical and Inverted Position |
Operating Gs, Maximum |
12.98 |
Damping |
Shunt Resistor |
ELECTRICAL
Power Requirements |
None, Self Generating |
Sensing Element Impedance |
215 ohms, ±5% at 77°F |
Grounding, Sensing Element |
Internally ungrounded |
Connections (Connector) |
Center Pin-Signal |
ENVIRONMENTAL
Temperature Range |
30 to 160 ºF |
Operating Position (Degrees from Vertical, Connector Up) |
±180 |
PHYSICAL
Vitec Part No. |
412585-159A |
Case Material |
Aluminum, Anodized |
Height (Inches) |
3.46 |
Body Diameter (Inches) |
1.62 |
Center Mounting Hole |
1/4-28 UNF x 1/4 in Deep |
Mating Cable Assembly |
Varies with application, contact factory |
Weight (Oz) |
14 |